N.B. On macOS the shortcuts use cmd instead of Ctrl and option instead of alt
| Grouped by function | |
|---|---|
| Keys | Function |
| F1 | Show Help |
| F2 | Show Help on Selected Item |
| Ctrl+M | Measure Response |
| Ctrl+N | Show Info Panel |
| Ctrl+S | Save Measurement |
| Ctrl+O | Open Measurement File |
| Ctrl+Shift+S | Save All Measurements |
| Ctrl+Alt+O | Open Filter file |
| Ctrl+Alt+S | Save Filters |
| Ctrl+Alt+R | Export RT60 data |
| Ctrl+I | Import Measured Data |
| Ctrl+Alt+I | Import Impedance Measurement |
| Ctrl+Shift+I | Import Impulse Response |
| Ctrl+Shift+U | Import Audio Data |
| Ctrl+Shift+N | Import Sweep Recording |
| Ctrl+Backspace | Delete Current Measurement |
| Ctrl+Shift+Backspace | Delete All Measurements |
| Ctrl+Shift+K | Show Room Simulator |
| Ctrl+Shift+L | Show Level Meters |
| Ctrl+Shift+M | Show SPL Meter |
| Ctrl+Shift+O | Show SPL Logger |
| Ctrl+Shift+P | Show TS Parameters window |
| Ctrl+Shift+Q | Show EQ panel |
| Ctrl+Shift+R | Show Signal generator |
| Ctrl+Shift+C | Show Scope |
| Ctrl+Shift+T | Show RTA |
| Ctrl+Shift+V | Show Overlays Window |
| Ctrl+Shift+W | Show IR Windows panel |
| Ctrl+Alt+M | Show Generate minimum phase dialog |
| Ctrl+Shift+E | Show Preferences |
| Ctrl+F | Retrieve Filter Settings from Unit |
| Ctrl+Shift+F | Send Filter Settings to Unit |
| Ctrl+Delete | Reset Filters for Current Measurement |
| Ctrl+LEFT | Select previous graph group |
| Ctrl+RIGHT | Select next graph group |
| Ctrl+1 | Select first graph group |
| Ctrl+2 | Select second graph group |
| Ctrl+3 | Select third graph group |
| Ctrl+4 | Select fourth graph group |
| Ctrl+5 | Select fifth graph group |
| Ctrl+6 | Select sixth graph group |
| Ctrl+7 | Select seventh graph group |
| Ctrl+8 | Select eighth graph group |
| Ctrl+9 | Select ninth graph group |
| Ctrl+Shift+G | Show/hide grid |
| Ctrl+Shift+H | Show/temporarily hide cursors |
| Ctrl+Shift+A | Frequency Axis Log/Linear |
| Ctrl+Z | Undo Zoom |
| Ctrl+Alt+F | Fit graph to data |
| Ctrl+Alt+Y | Fit graph Y axis to data |
| Ctrl+Alt+P | Fit position in graph, e.g. peak on impulse graph |
| Ctrl+Shift+1 | Apply 1/1 octave smoothing |
| Ctrl+Shift+2 | Apply 1/2 octave smoothing |
| Ctrl+Shift+3 | Apply 1/3 octave smoothing |
| Ctrl+Shift+6 | Apply 1/6 octave smoothing |
| Ctrl+Shift+7 | Apply 1/12 octave smoothing |
| Ctrl+Shift+8 | Apply 1/24 octave smoothing |
| Ctrl+Shift+9 | Apply 1/48 octave smoothing |
| Ctrl+Shift+X | Apply variable smoothing |
| Ctrl+Shift+Y | Apply psychoacoustic smoothing |
| Ctrl+Shift+Z | Apply ERB smoothing |
| Ctrl+0 | Remove smoothing |
| Ctrl+Shift+J | Save Graph As JPEG |
| LEFT, RIGHT, UP, DOWN | Move graph cursor |
| Shift + LEFT, RIGHT, UP, DOWN | Move graph |
| x | Zoom out horizontally |
| Shift+x | Zoom in horizontally |
| y | Zoom out vertically |
| Shift+y | Zoom in vertically |
| Alt+1 | Select measurement 1 |
| Alt+2 | Select measurement 2 |
| Alt+3 | Select measurement 3 |
| Alt+4 | Select measurement 4 |
| Alt+5 | Select measurement 5 |
| Alt+6 | Select measurement 6 |
| Alt+7 | Select measurement 7 |
| Alt+8 | Select measurement 8 |
| Alt+9 | Select measurement 9 |
| Alt+UP | Select previous measurement |
| Alt+DOWN | Select next measurement |
| Ctrl+UP | Select previous measurement |
| Ctrl+DOWN | Select next measurement |
| Ctrl+D | Disable the currently selected measurement |
| Ctrl+E | Enable all measurements |
| Ctrl+H | Toggle overlay highlight for the currently selected measurement |
| Ctrl+L | Lock the currently selected measurement |
| Ctrl+U | Unlock all measurements |
| Alt+A | Average the responses in All SPL graph |
| Alt+B | Save both in RTA window |
| Alt+C | Show the graph capture dialog |
| Alt+D | Toggle Distortion button in RTA window |
| Alt+G | Generate Decay or Waterfall plots |
| Alt+N | Open stepped sine dialog in RTA window |
| Alt+O | Open a WAV file for processing in RTA window |
| Alt+P | Save peak in RTA window |
| Alt+R | Reset Averaging in RTA window |
| Alt+S | Save current in RTA window |
| Alt+T | Start/stop the RTA |
| Alt+Z | Set t=0 at cursor in Impulse graph |
| Ctrl+Alt+E | Estimate IR delay for the currently selected measurement |
N.B. On macOS the shortcuts use cmd instead of Ctrl and option instead of alt
| Listed in key order | |
|---|---|
| Keys | Function |
| Alt+1 | Select measurement 1 |
| Alt+2 | Select measurement 2 |
| Alt+3 | Select measurement 3 |
| Alt+4 | Select measurement 4 |
| Alt+5 | Select measurement 5 |
| Alt+6 | Select measurement 6 |
| Alt+7 | Select measurement 7 |
| Alt+8 | Select measurement 8 |
| Alt+9 | Select measurement 9 |
| Alt+UP | Select previous measurement |
| Alt+DOWN | Select next measurement |
| Alt+A | Average the responses in All SPL graph |
| Alt+B | Save both in RTA window |
| Alt+C | Show the graph capture dialog |
| Alt+D | Toggle Distortion button in RTA window |
| Alt+G | Generate Decay or Waterfall plots |
| Alt+N | Open stepped sine dialog in RTA window |
| Alt+O | Open a WAV file for processing in RTA window |
| Alt+P | Save peak in RTA window |
| Alt+R | Reset Averaging in RTA window |
| Alt+S | Save current in RTA window |
| Alt+T | Start/stop the RTA |
| Alt+Z | Set t=0 at cursor in Impulse graph |
| Ctrl+LEFT | Select previous graph group |
| Ctrl+RIGHT | Select next graph group |
| Ctrl+UP | Select previous measurement |
| Ctrl+DOWN | Select next measurement |
| Ctrl+0 | Remove smoothing |
| Ctrl+1 | Select first graph group |
| Ctrl+2 | Select second graph group |
| Ctrl+3 | Select third graph group |
| Ctrl+4 | Select fourth graph group |
| Ctrl+5 | Select fifth graph group |
| Ctrl+6 | Select sixth graph group |
| Ctrl+7 | Select seventh graph group |
| Ctrl+8 | Select eighth graph group |
| Ctrl+9 | Select ninth graph group |
| Ctrl+D | Disable the currently selected measurement |
| Ctrl+E | Enable all measurements |
| Ctrl+F | Retrieve Filter Settings from Unit |
| Ctrl+H | Toggle overlay highlight for the currently selected measurement |
| Ctrl+I | Import Measured Data |
| Ctrl+L | Lock the currently selected measurement |
| Ctrl+M | Measure Response |
| Ctrl+N | Show Info Panel |
| Ctrl+O | Open Measurement |
| Ctrl+S | Save Measurement |
| Ctrl+U | Unlock all measurements |
| Ctrl+Z | Undo Zoom |
| Ctrl+Alt+E | Estimate IR delay for the currently selected measurement |
| Ctrl+Alt+F | Fit graph to data |
| Ctrl+Alt+I | Import Impedance Measurement |
| Ctrl+Alt+M | Show Generate minimum phase dialog |
| Ctrl+Alt+O | Open Filter file |
| Ctrl+Alt+P | Fit position in graph, e.g. peak on impulse graph |
| Ctrl+Alt+R | Export RT60 data |
| Ctrl+Alt+S | Save Filters |
| Ctrl+Alt+Y | Fit graph Y axis to data |
| Ctrl+Backspace | Delete Current Measurement |
| Ctrl+Delete | Reset Filters for Current Measurement |
| Ctrl+Shift+1 | Apply 1/1 octave smoothing |
| Ctrl+Shift+2 | Apply 1/2 octave smoothing |
| Ctrl+Shift+3 | Apply 1/3 octave smoothing |
| Ctrl+Shift+6 | Apply 1/6 octave smoothing |
| Ctrl+Shift+7 | Apply 1/12 octave smoothing |
| Ctrl+Shift+8 | Apply 1/24 octave smoothing |
| Ctrl+Shift+9 | Apply 1/48 octave smoothing |
| Ctrl+Shift+A | Frequency Axis Log/Linear |
| Ctrl+Shift+C | Show Scope |
| Ctrl+Shift+E | Show Preferences |
| Ctrl+Shift+F | Send Filter Settings to Unit |
| Ctrl+Shift+G | Show/hide grid |
| Ctrl+Shift+H | Show/temporarily hide cursors |
| Ctrl+Shift+I | Import .pcm Impulse Response |
| Ctrl+Shift+J | Save Graph As JPEG |
| Ctrl+Shift+K | Show Room Simulator |
| Ctrl+Shift+L | Show Level Meters |
| Ctrl+Shift+M | Show SPL Meter |
| Ctrl+Shift+N | Import Sweep Recording |
| Ctrl+Shift+O | Show SPL Logger |
| Ctrl+Shift+P | Show TS Parameters window |
| Ctrl+Shift+Q | Show EQ panel |
| Ctrl+Shift+R | Show Signal generator |
| Ctrl+Shift+S | Save All Measurements |
| Ctrl+Shift+T | Show RTA |
| Ctrl+Shift+U | Import Audio Data |
| Ctrl+Shift+V | Show Overlays Window |
| Ctrl+Shift+W | Show IR Windows panel |
| Ctrl+Shift+X | Apply variable smoothing |
| Ctrl+Shift+Y | Apply psychoacoustic smoothing |
| Ctrl+Shift+Z | Apply ERB smoothing |
| Ctrl+Shift+Backspace | Delete All Measurements |
| LEFT, RIGHT, UP, DOWN | Move graph cursor |
| Shift + LEFT, RIGHT, UP, DOWN | Move graph |
| x | Zoom out horizontally |
| Shift+x | Zoom in horizontally |
| y | Zoom out vertically |
| Shift+y | Zoom in vertically |